You are not logged in.
Pages: 1
I had to recompile the kernel without the hyperv option because of a kernel panic, but here it is.
Everything works, lan, xorg and mouse.
Below is the dmesg:
claud@claudarchbsd(~):uname -a
FreeBSD claudarchbsd 10.0-PRERELEASE FreeBSD 10.0-PRERELEASE #0: Mon Mar 24 19:29:29 UTC 2014 root@claudsarchbsd x86_64
claud@claudarchbsd(~):dmesg
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-PRERELEASE #0: Mon Mar 24 19:29:29 UTC 2014
root@claudsarchbsd x86_64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (1143.97-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6
Features=0x1f83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS,HTT>
Features2=0x80082201<SSE3,SSSE3,CX16,SSE4.1,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 536870912 (512 MB)
avail memory = 488075264 (465 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <VRTUAL MICROSFT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
vmbus0: <Vmbus Devices> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <VRTUAL MICROSFT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f7f00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff irq 11 at device 8.0 on pci0
vgapci0: Boot video device
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
Timecounter "Hyper-V" frequency 10000000 Hz quality 10000000
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
Consider tuning vm.kmem_size and vm.kmem_size_max
in /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 3.333 msec
Netvsc probe... DONE
hn0: <Synthetic Network Interface> on vmbus0
Netvsc initializing... hn0: Ethernet address: 00:15:5d:01:f0:02
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <Virtual HD 1.1.0> ATA-8 device
ada0: 16.700MB/s transfers (WDMA2, PIO 65536bytes)
ada0: 65536MB (134217728 512 byte sectors: 16H 255S/T 16383C)
ada0: Previously was known as ad0
(ada0:ata0:0:0:0): SETFEATURES ENABLE WCACHE. ACB: ef 02 00 00 00 40 00 00 00 00 00 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 00 ()
(ada0:ata0:0:0:0): RES: 51 00 00 00 00 00 00 00 00 00 00
(ada0:ata0:0:0:0): Retrying command
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <Msft Virtual CD/ROM 1.0> Removable CD-ROM SCSI-5 device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
(ada0:ata0:0:0:0): SETFEATURES ENABLE WCACHE. ACB: ef 02 00 00 00 40 00 00 00 00 00 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 00 ()
(ada0:ata0:0:0:0): RES: 51 00 00 00 00 00 00 00 00 00 00
(ada0:ata0:0:0:0): Error 5, Retries exhausted
random: unblocking device.
Netvsc initializing... Already initialized!
SMP: AP CPU #1 Launched!
Trying to mount root from zfs:tank/ROOT/archbsd-0 []...
calcru: runtime went backwards from 21059 usec to 10644 usec for pid 711 (sshd)
calcru: runtime went backwards from 188 usec to 95 usec for pid 8 (sctp_iterator)
claud@claudarchbsd(~):ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
hn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=18<VLAN_MTU,VLAN_HWTAGGING>
ether 00:15:5d:01:f0:02
inet 192.168.1.20 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::215:5dff:fe01:f002%hn0 prefixlen 64 scopeid 0x2
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Last edited by Claud (2014-04-17 13:13:37)
Offline
Pages: 1